Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.
Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Pair of EndCaps for Yakima CoreBar.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Pair of EndCaps for Yakima JetStream bars.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in the skewer, and you're all set.
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
Kuat's 1.25" to 2" adapter mounts to your 1.25-inch Kuat Alpha, Beta, or Sherpa rack, allowing them to fit a 2-inch receiver. Mounting hardware included.
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately
$18.95 - $44.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in
$19.00 - $29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm thru-axle, and you're all set.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 20mm thru-axle, and you're all set.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface. This mount works for most quick-release fat bike forks.
Thru-axle adapter for the Kuat TRIO rack.
An adapter for Kuat's Trio roof rack to make it compatible with most 15mm thru-axle fat bike forks. Includes rear tire strap extension. Available in 142mm and 150mm-wide models.
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.
Add some Fox flair to your hitch! This 2-inch Fox head fits a standard 2-inch receiver.
The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Page 1 of 7 Next page